Product Name
SNSC FD35 3.5-Ton Diesel Forklift Truck — 3500 kg Heavy-Duty Industrial Lift
Product Advantages
Engineered for intensive cargo-handling operations, this 3.5-ton diesel forklift provides a maximum rated capacity of 3,500 kg.
Its responsive hydraulic circuit enables smooth fork elevation, controlled lowering, and precise load adjustment.
A rigid chassis and reinforced mast structure offer dependable strength during prolonged industrial use.
The operator area provides ample space, convenient controls, and clear forward visibility for safer daily operation.
It is well suited to manufacturing plants, warehouses, cargo yards, logistics terminals, and construction projects.
The machine is supplied with a 12-month warranty and round-the-clock remote technical service.
Product Introduction
The SNSC FD35 counterbalanced forklift is engineered for repetitive heavy-load handling across commercial and industrial facilities. Rated to carry 3,500 kg, the machine uses a rigid main body and reinforced lifting equipment to improve durability and operational stability.
Its high-output diesel engine supports dependable acceleration, climbing ability, and lifting performance. A calibrated hydraulic system provides smooth vertical movement and precise adjustment of the mast angle. The driving area offers a broad field of view, ergonomically positioned controls, and sufficient space for extended shifts.
Typical Workplaces:
Pallet warehouses
Manufacturing workshops
Road and building projects
Marine freight facilities
Material distribution compounds
Challenging exterior sites
Mechanical Principle:
Engine torque is transmitted to the drive axle through the gearbox, allowing the forklift to travel. At the same time, the engine turns a hydraulic pump that sends pressurized oil to the lift and tilt cylinders. Steering equipment controls direction, while braking components regulate speed and hold the truck securely.
Product Parameters
| Specifications |
Unit |
FD35 |
| 1 |
Characteristics |
Power |
— |
diesel |
| 2 |
Rated Capacity |
kg |
3500 |
| 3 |
Center of load |
mm |
500 |
| 4 |
Lifting height |
mm |
3000 |
| 5 |
Free lifting height |
mm |
145 |
| 6 |
Forks L×W×H |
mm |
1070×125×45 |
| 7 |
Tilt Forward/Backward |
. |
6/12 |
| 8 |
Min.turning radius |
mm |
2600 |
| 9 |
Min.ground clearance(Mast) |
mm |
120 |
| 10 |
Overhead guard height |
mm |
2170 |
| 11 |
Front overhang |
mm |
545 |
| 12 |
Performance |
Max.traveling speed(loaded) |
km/h |
20 |
| 13 |
Max.lifting speed(loaded/empty) |
mm/s |
470/520 |
| 14 |
Drawback pull/Grade ability |
kN/% |
18/20 |
| 15 |
Dimensions |
Overall length (without fork) |
mm |
2825 |
| 16 |
Overall width |
mm |
1230 |
| 17 |
Mast lowered height |
mm |
2065 |
| 18 |
Mast extended height |
mm |
4260 |
| 19 |
Chassis |
Tire |
Front |
— |
28×9-15-12PR |
| 20 |
Rear |
— |
6.50-10-10PR |
| 21 |
Wheelbase |
mm |
1800 |
| 22 |
Tread width |
Front/Rear |
mm |
1000/970 |
| 23 |
Curb weight |
None-load |
kg |
4250 |
| 24 |
Powertrain |
Battery |
Voltage/Capacity |
V/Ah |
12/90 |
| 25 |
Engine |
Model |
— |
XC490BPG |
| 26 |
Rated power |
kw/r.p.m |
37/2650 |
| 27 |
Rated torque |
Nm/r.p.m |
148/2000 |
| 28 |
Cylinder amount |
— |
4 |
| 29 |
Bore×Stroke |
mm |
90×105 |
| 30 |
|
Displacement |
— |
2.54 |
| 31 |
Fuel tank |
L |
70 |
| 32 |
Transmission |
— |
1/1 automatic transmission |
| 33 |
Working pressure |
MPa |
17.5 |
Description:
(1)Auto electric hydraulic transmission by TCM technology, just use your finger can achieve the forklift's forward and backward;
(2)Japan hydraulic system, by using Shimadzu brand Valve and Pump;
(3)USA Eaton steering gear;
(4)LED light, with long durability time;
(5)Copper Water tank, with better heat radiation;
(6)Red/yellow/green colors for your reference.
Common Optionals:
Japan Isuzu/Mitsubishi engine,Side shifter,Double front tires,Solid tire,Double air filter,Vertical exhaust,fork extension,Cab,Fork positioner.
Product Pictures
After-sales service
Our Commitment to You:
1. We stand behind the quality of the SNSC FD35 with a comprehensive 12-month warranty.
2. Coupled with our 24/7 online customer support, we ensureyou have the peace of mind and assistance you need, whenever you need it
3. Maintenance consultation and operation training
4. Reliable parts supply to ensure uptime
5. Quick-response parts delivery
6. Lifetime support for operation and maintenance
Contact information
Choose SNSC FD35–Where Power, Versatility, and Support Meet.
Contact me now!
Whatsapp: +86 193 1378 4134
I'll send you product details, price, latest discount,shipping costs, and any other questions you want to know!
When you place an order, you will receive a surprise special Chinese gift
Your message must be between 20-3,000 characters!
